Asphalt Pavers

LEEBOY 1000G — ASPHALT PAVER

Small footprint, large results. The gravity-feed tilt hopper featured on the 1000G can be raised to a steeper level than any other paver in its class allowing for optimum material flow. This paver boasts of a sleek design in which the hopper wings can be retracted. This dynamic feature allows continuous material flow while reducing the machine’s overall width. As on all LeeBoy pavers, this smaller track paver features our superior Legend Screed system that is proven to supply one of the best mats in the industry.

PERFORMANCE FEATURES
• 49 hp (37 kw) Kubota Tier 4 Final Diesel Engine
• Paving Widths Variable Up To 13’
• Low Deck Configuration
• Best-In-Class Tilt Hopper Angle
• Single Lever Hopper and Wing Control
• Ultra-efficient Material Management System
• Under Auger Material Cut-Off Gates
• 5.5 Ton Capacity Material Hopper
• Steel Track for Superior Flotation
• Proven Legend Screed System
• Heated and Vibrating Screed System

ENGINE
• Kubota turbocharged diesel,
• Tier 4 Final – 49 hp (37kw

HOPPER
Hopper size: 5.5 ton

PAVING WIDTHS
Variable up to 13’

PAVING DEPTHS
Depth: 0” to 6”

SCREED
• Legend Propane full free floating screed
• Consisting of a main screed and two hydraulically operated screed extensions
• Equipped with a electric vibrator

SCREED HEAT
• Two propane burners on main screed
• One propane burner on each extension

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a depth indicator for the operator

MATERIAL HANDLING
• Two independent hydraulically operated under auger material cut-off gates
• Two independent hydraulically operated cast augers

OPERATOR’S PLATFORM
• Full machine width platform

OPERATOR’S CONTROLS
• All control levers are on left side
• Right side levers include left/right drive control, right auger, right screed extension hopper
• Color graphic control screen with digital read outs. Review and monitor system vitals including: oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, engine diagnostics

STEERING
Independent hydrostatic steering from left or right side of machine

WASHDOWN SYSTEM
Electric HD pump with two hoses and spray nozzles

PUSH ROLLERS
Two rollers with sealed bearings

TRACK DRIVE SYSTEM
• Hydrostatically powered, self-cleaning friction drive tracks
• Track size: 14” wide x 4’ long steel (wheel base)
• Paving speed: 0 to 220’ per minute (2.5 mph)
• Travel speed: 0 to 220’ per minute (2.5 mph)

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon light
• Horn
• Lockable fuel and hydraulic caps
• Electric gauge package (oil pressure, voltmeter, fuel)
• Wired for sonic auger, sensory and cord

OPTIONAL EQUIPMENT
• Two-speed track drive (track only)
• Fail-safe brake
• Rubber tire drive system
• Sonic auger, sensors and cords
• Slope meter
• LED work light package
• Hose reel, limited to one
• Electric screws for grade controls
• Wiring only, grade controls (TopCon), includes A/M modules
• Sonic grade control, one side (TopCon)

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

LEEBOY 6150 — ASPHALT PAVER

The LeeBoy 6150 wheeled asphalt paver was truly designed with the paving professional in mind. With a quicker travel speed, this paver delivers a quality mat while easily maneuvering from point to point. Given traditional LeeBoy style and operation, the operator has a choice of working in a high-deck or low-deck configuration which can greatly benefit visibility depending on the application. Improved easy-to-reach service compartments allows quick access for regular maintenance requirements.

PERFORMANCE FEATURES
• 74 hp (55 kw) Kubota Tier 4 Final Diesel Engine
• Paving Widths Variable Up To 15’
• Paving Speeds: 0 to 228’ per minute
• Travel Speed: 0 to 660’ per minute
• Operator’s Choice: High or Low Deck Configuration
• Dual Electronic Steering Wheels
• Sliding Operator Control Station
• 7 Ton Capacity Material Hopper
• Electric Screed Heat
• Vertically Adjustable Oscillating Push Rollers
• Under Auger Material Cutoff

ENGINE
• Kubota turbocharged diesel,
• Tier 4 Final – 74hp (55 kw) @ 2,200 RPM

HOPPER
Hopper size: 7.0 ton

PAVING WIDTHS
Variable up to 15’

PAVING DEPTHS
• Manual flight screws positioned on the screed to control material thickness
• Depth: 0” to 6”

SCREED
• Legend Electric screed
• Consisting of a main screed and two hydraulically operated screed extensions
• Equipped with two electric vibrators

SCREED HEAT
• Legend electric screed heat, 10kw generator
• Electric timer and automatic RPM control system
• 2 Blade heating elements in main, 1 blade element in each extension

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a levelling indicator for the operator

MATERIAL HANDLING
• Two independentaly controled, hydraulically operated under auger material cutoff
• Two 12” diameter independent hydraulically operated cast augers
• Single point lube system

OPERATOR’S PLATFORM
• Full machine width platform
• Walkboard extensions slide outs, left and right

OPERATOR’S CONTROLS
All control switches are in a single control box which can be moved from right side to left side

STEERING
• Dual electronic steering
• Electronically controlled pumps operated by the forward/reverse joysticks

WASHDOWN SYSTEM
Electric HD pump and two hose reels

PUSH ROLLERS
Two vertically adjustable rollers with sealed bearings mounted to allow pivoting on frame

WHEELED DRIVE SYSTEM
• Hydrostatic drive using hydrostatic pump which drives left and right sides
• Rear: 385/65 R22.5 heavy-duty hydroinflated truck tires
• Front: steerable wheels, 12” x 22” diameter solid rubber tires
• Paving speed: 0 to 228’ per minute (2.6 mph)
• Travel speed: 0 to 660’ per minute (7.5 mph)

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon light
• Lockable fuel and hydraulic caps
• LED work light package

OPTIONAL EQUIPMENT
• Legend HD Screed, 8’ to 15’
• Remote screed controls
• Automatic screed temperature controls
• Screed extension vibration
• Sloping screed extensions
• Power crown
• Heated endgates
• 12” x 4.5” berm extensions, right and left
• Single point lube system, conveyors
• Single point lube system, screed
• Wiring only, grade controls (TopCon)
• Sonic grade control, one side (TopCon)
• Dual grade control (TopCon)
• Dual grade and slope (TopCon)
• Truck Hitch
• Truck Hitch Valving Only

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

LEEBOY 7000C — ASPHALT PAVERS

Using our proven Legend Screed technology, the LeeBoy 7000C delivers a quality end result while maintaining extreme versatility. This large capacity paver is a classic entry-level conveyor paver able to maneuver flawlessly around obstacles in smaller operational areas such as parking lots and driveways. Highlighting the industry’s widest conveyor system within its class, the 7000C quickly preforms the job it has set to accomplish – laying a consistent, presentable mat each time.

PERFORMANCE FEATURES:
• 65 hp (48 kw) Kubota Tier 4 Final Diesel Engine
• Paving Widths Variable Up To 13’ (3.9 m)
• Low Deck Configuration
• Hydrostatic Controls
• Operator Control Functions on Both Sides of Unit
• Two 3’ (0.91 m) wide automatic conveyors
• Gauge Package for System Monitoring
• 6 ton (5,443 kg) Capacity Material Hopper
• Proven Legend Screed System
• Heated and Vibrating Screed System
• Heavy-duty Undercarriage and Track System

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon Light
• Electronic gauge package (oil pressure, voltmeter, fuel)
• Wired for sonic auger, sensor and grade controls

OPTIONAL EQUIPMENT
• Truck hitch
• Failsafe brake with anti-creep
• Slope meter
• Second seat
• LED work light package
• Sonic auger, sensor and cords
• Hose reel, limited to one
• Electric screws for grade controls
• Wiring only, grade controls (TopCon), includes A/M modules
• Sonic grade control, one side (TopCon)

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

LEEBOY 8515E — ASPHALT PAVERS

Sleek, modern and low-profile are three words that immediately come to mind when evaluating the LeeBoy 8515E Asphalt Paver. Featuring an engine hood height of 69 inches (1.75 m) and a sliding control station, the 8515E gives the operator an extremely clear and comfortable view of their surroundings. With a class-leading tunnel size and self-cleaning conveyor bars, this machine is built to perform at the highest level. Easy-to-access, convenient maintenance areas are also a highlight of machine ownership.

PERFORMANCE FEATURES
• 74 hp (48 kw) Kubota Tier 4 Final Diesel Engine
• Paving Widths Variable Up To 15’
• Low Profile Engine Hood For Better Visibility
• Choice of High Deck or Low Deck Configuration
• Sliding Operator Control Station
• Ultra-efficient Material Management System
• Pressure Ports for Diagnostics and Testing
• 7.5 Ton Capacity Material Hopper
• Proven Legend Screed System
• Electric Screed Heat, 10 kw Generator
• Heavy-duty Undercarriage and Track System

ENGINE
• Kubota turbocharged diesel,
• Tier 4 Final – 74 hp (55.4 kw)

HOPPER
Hopper size: 7.5 ton

PAVING WIDTHS
Variable up to 15’

PAVING DEPTHS
• Manual flight screws positioned on the screed to control material thickness
• Depth: 0” to 6”

SCREED
• Legend Electric screed
• Consisting of a main screed and two hydraulically operated screed extensions
• Equipped with two electric vibrators

SCREED HEAT
• Legend electric screed heat, 10kw generator
• Electric timer and automatic RPM control system
• 2 Blade heating elements in main, 1 blade element in each extension

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a levelling indicator for the operator

MATERIAL HANDLING
• Two independentaly controled, hydraulically operated under auger material cutoff
• Two 12” diameter independent hydraulically operated cast augers

OPERATOR’S PLATFORM
• Full machine width platform
• Walkboard extensions slide outs, left and right

OPERATOR’S CONTROLS
All control switches are in a single control box which can be moved from right side to left side

STEERING
• Dual electronic steering
• Electronically controlled pumps operated by the forward/reverse joysticks

WASHDOWN SYSTEM
Electric HD pump and two hose reels

PUSH ROLLERS
Two vertically adjustable rollers with sealed bearings mounted to allow pivoting on frame.

TRACK DRIVE SYSTEM
• Hydrostatically powered, self-cleaning crawler type
• Track size: 14” wide x 77” long poly
• Paving speed: 0 to 150’ per minute (1.7 mph)
• Travel speed: 0 to 300’ per minute (3.4 mph)

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon light
• LED work light package
• Vandalism protection covers
• Electronic gauge package (oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, level warning)

OPTIONAL EQUIPMENT
• Legend HD Screed, 8’ to 15’, 10kw generator
• Remote screed control
• Automatic screed temperature controls
• Screed extension vibration
• Rubber track, continuous – in lieu of poly
• Steel track – in lieu of poly
• Sloping screed extensions
• Heated end gates
• Truck hitch
• Power crown
• Steering wheel drive controls (in lieu of joysticks)
• Wiring only, grade controls, includes A/M module
• Sonic grade control both sides
• Sonic grade control, one side (TopCon)
• Dual sonic grade (Topcon)
• Dual sonic grade and slope (Topcon)
• 12” x 4.5” berm extension, left and right
• Other options available

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

LEEBOY 8510E — ASPHALT PAVERS

Serving as a staple among commercial paving contractors, the LeeBoy 8510E delivers precise asphalt placement resulting in a flawless mat. Comprised of robust components for longer wear, this asphalt paving solution is perfect for contractors seeking a lower cost per ton. Embracing a large material receiving hopper and one of the widest conveyor system on the market, this paver is meant to deliver the utmost productivity between truckloads. If you desire an all-around commercial paving machine that delivers unmatched results, the 8510E is for you.

PERFORMANCE FEATURES
• 74 hp (55 kw) Kubota Tier 4 Final Turbocharged Diesel Engine
• Paving Widths Variable Up To 15’
• Choice of High Deck or Low Deck Configuration
• Dual Lever Joystick Steering Controls (both sides)
• Ultra-efficient Material Management System
• Gauge Package for System Monitoring
• 7.5 Ton Capacity Material Hopper
• Proven Legend Screed System
• Electric Screed Heat, 10 kw Generator
• LED Operating Light Package

SCREED
• Legend Electric screed
• Consisting of a main screed and two hydraulically operated screed extensions
• Equipped with two electric vibrators

SCREED HEAT
• Legend electric screed heat, 10kw generator
• Electric timer and automatic RPM control system
• 2 Blade heating elements in main, 1 blade element in each extension

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a levelling indicator for the operator

MATERIAL HANDLING
• Two independentaly controled, hydraulically operated under auger material cutoff
• Two 12” diameter independent hydraulically operated cast augers

OPERATOR’S PLATFORM
• High Deck: Seats mounted on tractor
• Low Deck: Seats mounted on screed
• Walkboard extensions slide outs, left and right

OPERATOR’S CONTROLS
• All control levers are on left side
• Right side levers include screed raise/float, left and right cutoffs, hopper wings, and right screed extension

STEERING
• Dual electronic steering
• Electronically controlled pumps operated by the forward/reverse joysticks

WASHDOWN SYSTEM
Electric pump with two hose reels

PUSH ROLLERS
Two rollers with sealed bearings mounted to allow pivoting on frame

TRACK DRIVE SYSTEM
• Hydrostatically powered, self-cleaning crawler type
• Track size: 14” wide x 77” long poly
• Paving speed: 0 to 150’ per minute (1.5 mph)
• Travel speed: 0 to 300’ per minute (3.2 mph)

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon light
• LED work light package
• Glow plugs
• Vandalism protection covers
• Horn

OPTIONAL EQUIPMENT
• Legend HD Screed, 8’ to 15’
• Screed extension vibration
• Automatic screed temperature control
• Heated endgates
• Slope meter
• Horizontal flight screws
• 3:1 flight screw adjusters
• Single point lube system, screed
• Rubber track continuous, in lieu of poly
• Steel track, in lieu of poly
• High deck configuration
• Steering wheel drive controls, in lieu of joysticks
• Truck hitch
• Wiring only, grade controls (TopCon)
• Sonic grade control, one side (TopCon)
• Dual grade control (TopCon)
• Dual grade and slope (TopCon)
• 12”x 4.5” berm extension, left & righ

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

LEEBOY 8530 — ASPHALT PAVERS

We’ve set the standards in heavy-commercial paving even higher! Equipped with exciting new features that were truly designed with the paving professional in mind, the LeeBoy 8530 is the new benchmark. Standard machine assets include the 4,150 lbs Legend HD PRO Screed with spring-loaded end gates, front adjustable conveyor chains, pivoting dual seating and controls as well as many other enhancements. And as always, LeeBoy’s wide slow-moving conveyor system moves material from the truck to the screed without segregation which ensures a flawless mat.

PERFORMANCE FEATURES
• 125 hp (93 kw) Kubota Tier 4 Final Diesel Engine
• Legend HD PRO Screed, Weight 4,150 lbs
• Paving Widths Variable Up To 15’ 6”
• 9 Ton Capacity Material Hopper
• Operator’s Choice of High or Low Deck Configuration
• Remote Mounted SCR for Greater Visibility
• Dual Electronic Steering & Adjustable Operator Platforms
• Ultra-efficient Wide-Conveyor Material Management
• Automatic Temperature Control (ATC) Standard
• Electric Screed Heat, 14.4 kw Generator
• Actuator Driven Hood Lift to Aid in Maintenance

EGINE
• Kubota turbocharged diesel
• Tier 4 Final – 125 HP (93.2 kW)
• Remote mounted DOC + DPF + SCR
• MURR I/O distributor blocks with LED lighting

PAVING WIDTHS
• Variable paving widths up to 15’ 6″

PAVING DEPTHS
Manual flight screws positioned on the screed to control material thickness, depth: 0” to 8”

SCREED
• Legend HD PRO Screed, free floating
• Weight: 4,150 lbs
• Consisting of a main screed and two hydraulically operated screed extensions
• Spring-loaded end gates standard
• Sloping screed extensions standard
• Equipped with two electric vibrators, 4100 RPM

SCREED HEAT
• Legend electric screed heat, 14.4 kw generator
• Electric timer and automatic temperature control
• Sealed s-curve elements in main screed and sealed blade-style elements in extensions

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a levelling indicator for the operator

MATERIAL HANDLING
• Two hydraulically operated under auger material cutoffs can close in reverse
• Single point lube system
• Two 12” independent hydraulically operated cast augers

OPERATOR’S PLATFORM
• Full machine width platform, slide out extensions
• Pivoting, swing out seats and control panels

OPERATOR’S CONTROLS
• Dual adjustable, independent control stations
• Colored LED, sunlight viewable control screens with digital readouts

STEERING
• Dual electronic steering controls
• Electronically controlled pumps operated by the forward/reverse joysticks

WASHDOWN SYSTEM
Electric HD pump with hose and two hose reels

PUSH ROLLERS
• Two rollers with sealed bearings mounted to allow pivoting on frame, built in material scrapers
• Vertically adjustable oscillating push rollers

TRACK DRIVE SYSTEM
• Hydrostatically powered, self-cleaning crawler type
• Track size: 14” w x 87” l poly
• Paving speed: 0 to 150’ per minute (1.7 mph)
• Travel speed: 0 to 300’ per minute (3.4 mph)

ADDITIONAL STANDARD EQUIPMENT
• Gauge package
• Actuator-driven hood lift
• LED beacon light
• LED work light package
• Integrated tool boxes
• Vandalism protection covers
• 2 Year Standard Product Warranty

OPTIONAL EQUIPMENT
• Additional control post, wire harness – left side
• Screed extension vibration
• Rubber track, continuous
• Heated end gates
• Slope meter
• Horizontal flight screw
• 3:1 flight screw adjusters
• Truck hitch
• Power crown
• Hydraulically extendable oscillating push roller
• Central point lube system
• Steering knob drive controls, in lieu of joysticks
• Wiring only, grade controls (TopCon)
• Sonic grade control, one side (TopCon)
• Dual grade control (TopCon)
• Dual grade and slope (TopCon)
• 12” x 6” berm extensions, left and right

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

LEEBOY 8616D – ASPHALT PAVER

The 8616D Asphalt Paver encompasses many features of a larger highway-class paver yet maintains a sleek footprint to better suit the commercial contractor looking for a heavier unit. Highly adaptable for heavy commercial jobs, the flexible spontaneous design gives the operator the ability to switch the unit from high deck to low deck in the matter of minutes. There’s nothing left to desire as this unit provides greater serviceability with easy to locate components, consistent material flow and the Legend HD PRO Screed for higher production yields.

PERFORMANCE FEATURES
• 127 hp (95 kW) Kubota Tier 4 Final Diesel Engine
• Legend HD PRO Screed, Weight 4,150 lbs
• Paving Widths Variable Up To 15’ 6”
• 9 Ton Capacity Material Hopper
• Operator’s Choice of High or Low Deck Configuration
• Remote Mounted SCR for Greater Visibility
• Dual Electronic Steering & Adjustable Operator Platforms
• Two 20.5” Feeding Conveyors
• Automatic Temperature Control (ATC) Standard
• Electric Screed Heat, 14.4 kw Generator
• Actuator Driven Hood Lift to Aid in Maintenance

ENGINE
• Kubota turbocharged diesel
• Tier 4 Final – 127 hp (95 kW)
• Remote mounted DOC + DPF + SCR
• MURR I/O distributor blocks with LED lighting

HOPPER
Hopper size: 9 ton

PAVING WIDTHS
Variable up to 15’ 6”

PAVING DEPTHS
Manual flight screws positioned on the screed to control material thickness, depth: 0” to 8”

SCREED
• Legend HD PRO Screed, free floating
• Weight: 4,150 lbs
• Consisting of a main screed and two hydraulically operated screed extensions
• Spring-loaded end gates standard
• Hydraulic sloping screed extensions standard
• Equipped with two electric vibrators, 4100 RPM

SCREED HEAT
• Legend electric screed heat, 14.4 kw generator
• Electric timer and automatic temperature control
• Sealed s-curve elements in main screed and sealed blade-style elements in extensions

SCREED CROWN/VALLEY
• Equipped with a crown/invert adjustment
• Includes a levelling indicator for the operator

MATERIAL HANDLING
• Two hydraulically operated under auger material cutoffs can be set to close in reverse
• Single point lube system
• Two 12” independent hydraulically operated cast augers

OPERATOR’S PLATFORM
• Full machine width platform, slide out extensions
• Pivoting, swing out seats and control panels

OPERATOR’S CONTROLS
• Dual adjustable, independent control stations
• Colored LED, sunlight viewable control screens with digital readouts

STEERING
• Dual electronic steering controls
• Electronically controlled pumps operated by the forward/reverse joysticks

WASHDOWN SYSTEM
Electric HD pump with hose and two hose reels

PUSH ROLLERS
• Two rollers with sealed bearings mounted to allow pivoting on frame, built in material scrapers
• Vertically adjustable oscillating push rollers

TRACK DRIVE SYSTEM
• Hydrostatically powered, self-cleaning crawler type
• Track size: 14” w x 108” long poly
• Paving speed: 0 to 125’ per minute (1.4 mph)
• Travel speed: 0 to 350’ per minute (3.9 mph)

ADDITIONAL STANDARD EQUIPMENT
• Gauge package
• Actuator-driven hood lift
• LED beacon light
• LED work light package
• Integrated tool boxes
• Vandalism protection covers
• 2 Year Standard Product Warranty

OPTIONAL EQUIPMENT
• Smooth Ride HD poly pad track
• Screed extension vibration
• Heated endgates
• Slope meter
• 3:1 flight screw adjusters
• Horizontal flight screw adjusters
• Truck hitch
• Hydraulically extendable oscillating push roller
• Central point lube system, screed
• Steering knob drive controls (in lieu of joysticks)
• Power crown
• Wiring only, grade controls (TopCon)
• Sonic grade control, one side (TopCon)
• Dual grade control (TopCon)
• Dual grade and slope (TopCon)
• 12” x 6” Berm extension (LH & RH)
• LED Blade light system
• Umbrella Mounts (x2)

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

LEEBOY 8500E — ASPHALT PAVERS

Boasting of a small footprint yet retaining a 15 foot-wide screed, the LeeBoy 8500E allows for wider and longer pulls than competitive pavers. The new and improved 8500E series paver is equipped for the next generation, with a 71 hp Kubota turbocharged diesel engine: DOC only. No regen required. This machine is enhanced with 12″ augers, heavy duty radius hopper wings, and more robust hydraulics for cooling and efficiency. The larger fuel tank increases the daily run time. These enhancements make the 8500E more productive than ever, along with less hand work, means the end user minimizes the number of stops which increases productivity and profitability. The 8500E features upgraded controls which lessens any learning curve and allows for immediate use. This paver is a true commercial class machine easily fitting onto a trailer with other complementary equipment in order to provide high revenue opportunities for its patrons.

PERFORMANCE FEATURES
• 71 hp (53 kw) Kubota Tier 4 Final Turbocharged Diesel DOC Only Engine
• Paving Widths Variable Up To 15’
• Left Side Control Levers, Sliding Operator Control Station
• Ultra-efficient Material Management System
• Gauge Package for System Monitoring
• 7.5 Ton Capacity Material Hopper
• Proven Legend Screed System
• Propane or Electric (option) Screed Heat
• Steel Track Drive with Automatic Adjustment
• Automatic Screed Heat Cycling

ADDITIONAL STANDARD EQUIPMENT
• Back-up alarm
• LED beacon light
• Electronic gauge package (oil pressure, voltmeter and fuel)
• Glow plugs
• Vandalism protection covers
• Horn
• Wired for sonic auger, sensors and cords

OPTIONAL EQUIPMENT
• Legend Electric screed 8’ to 15’
• Heated end gates
• 14” polyurethane pad track
• Rubber track 15.75” wide continuous in lieu of steel
• Truck hitch
• Slope meter
• Second seat
• LED work light package
• Sonic auger, sensors and cords
• Electric screws for grade controls
• Wiring only, grade controls (TopCon)
• Sonic grade controls, one side (TopCon)
• Dual grade controls (TopCon), includes electric screws
• Hose reel, limited to two

Specifications are subject to change without prior notice.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.