Wirtgen
SP25i

WIRTGEN SP25i – INSET/OFFSET SLIPFORM PAVERS

CONTINUOUS PAVING OF CONCRETE SURFACES AND MONOLITHIC PROFILES

Offset pavers are used to produce monolithic concrete profiles such as protective concrete walls, curb profiles, gutters or narrow paths. Thanks to numerous options, such as for concrete feeding or slipforming, offset slipform pavers are extremely versatile. Inset pavers cost-effectively produce concrete pavements, such as for motorways, arterial roads, runways or railway lines. In addition to single-layer concrete paving, bottom-layer and top-layer concrete can also be paved synchronously in two layers ‘wet on wet’.

OFFSET PLATFORM PAVERS

With offset slipform pavers, the concrete is transported into the offset mold via a loading conveyor or a conveyor auger. The offset mold can be mounted on the left or right-hand side of the machine. A number of molds in a wide range of different shapes and sizes are available for individual applications. The offset profiles are continually produced monolithically, with or without reinforcements. Machine features include a top-quality machine control system, a practical steering and drive system and stringline-free concrete paving.

ONE-OF-A-KIND, MULTIFUNCTIONAL OFFSET AND INSET SLIPFORM PAVER

• The multifunctional slipform paver paves a wide range of monolithic profiles up to 6 ft 7 in thick.

• It can be used to easily pave concrete surfaces up to a paving width of 12 ft using both the inset and offset methods (cannot be combined with all options).

• One or two hydraulic parallelogram swing arms at the front and two hydraulically telescoping crawler units at the rear make it possible to pave concrete in an extremely flexible manner.

• The intelligent, electronic steering and control concept means the machine can be driven through very tight turning angles and is highly adaptable to any job site situation.

• The machine can be precisely controlled via stringline scanning, without a stringline using WIRTGEN AutoPilot 2.0, or via 3D applications.

FEATURES

FULLY MODULAR INSET MOLD SYSTEM

Modular design permits machine configuration in accordance with site conditions. Adjustable to different working widths. Special profile cross-sections can be implemented.

HIGHLY FLEXIBLE OFFSET MOLD SYSTEM

Concrete feeding system offering a wide variety of adjustment options. Flexible arrangement of the offset mold on the left or right side, close to or far to one side of the machine frame. A wide variety of different offset molds for poured-in-place profiles is available for a wide range of applications.

HIGH-QUALITY MACHINE CONTROL SYSTEM

High-quality machine control system for maximum operational reliability, precise machine functionality and automatic detection of configuration parameters and operating states.

STEERING AND DRIVE SYSTEM BUILT TO FIELD REQUIREMENTS

An adaptive electronic steering and control system ensures precise driving behavior and high precision in concrete paving.

EFFICIENT DIESEL ENGINE CONTROL

Engine management in accordance with performance requirements for low diesel consumption and lowest environmental emissions.

AUTOPILOT 2.0 – COST-EFFICIENT STRINGLESS MACHINE CONTROL SYSTEM

Cost-efficient machine control system developed by WIRTGEN for high-precision stringless concrete paving.

FUTURE-PROOF 3D INTERFACE

Certified standard interface for reliable communication with standard 3D systems.

PREMIUM-CLASS CROSS SLOPE CONTROL SYSTEM

Unmatched electronic cross slope control system developed in-house to ensure perfect paving results.

EASE OF OPERATION

Ergonomically designed operator’s platform with self-explanatory operating concept for maximum productivity.

MODULAR ADAPTABILITY

Flexible arrangement of the paving mold and track units to ensure high machine utilization rates.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specifications

• MACHINE WEIGHTS *5 - NOTE: *5 = Weights depend on the paver's range of equipment and working width. *6 = Weight of machine, half weight of all operating materials, machine operator (165 lbs (75 kg)), on-board tools, no optional equipment features
• CONCRETE MOLD - Height adjustment of mold (option): 15.7 in (400 mm)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Basic machine including auger conveyor: 25 ft 11 in x 8 ft 2 in x 9 ft 8 in (7,900 mm x 2,500 mm x 2,950 mm)
• FILLING CAPACITIES - Water tank:
• FILLING CAPACITIES - Hydraulic oil tank, hydraulic vibration:
• CONCRETE KIT FOR INSET PAVING (OPTION) - Oscillating beam: 6 ft 7 in to 12 ft (2,000 mm to 3,650 mm)
• ENGINE - Cooling: Water
• VIBRATION - Electically driven vibrators:
• VIBRATION - Hydraulically driven vibrators:
• FILLING CAPACITIES - Fuel tank: 99.1 gal (375 l)
• TRIMMER (OPTION) - Max. width : 5 ft 3 in (1,600 mm)
• TRIMMER (OPTION) - Standard width: 2 ft (600 mm)
• ENGINE - Number of cylinders: 4
• MACHINE WEIGHTS *5 - Trimmer, working width 2 ft. (600 mm): 2,866 lbs (1,300 kg)
• MACHINE WEIGHTS *5 - Belt conveyor: 1,874 lbs (850 kg)
• ENGINE - Fuel consumption 2/3 load:
• TRIMMER (OPTION) - Max. lift: 2 ft 7 in (775 mm)
• HEIGHT ADJUSTMENT OF MACHINE - Hydraulic height adjustment: 4 ft 1 in (1,250 mm)
• TRIMMER (OPTION) - Working depth: 0 to 5.9 in (0 – 150 mm)
• TRIMMER (OPTION) - Two-stage lateral telescoping feature:
• CONCRETE FEEDING SYSTEM - Auger conveyor (option): Length: 15 ft 1 in (4,600 mm); auger diameter: 15.7 in (400 mm)
• ENGINE - Displacement: 246.5 c.i. (4,040 cm³)
• FILLING CAPACITIES - Additional water tank:
• CONCRETE FEEDING SYSTEM - Auger conveyor, long (option): Length: 18 ft 8 in (5,700 mm); auger diameter:15.7 in (400 mm)
• ELECTRICAL SYSTEM - Electrical power supply: 24 V
• ENGINE - Fuel consumption, field mix: 3.6 gal/h (13.5 l/h)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Trimmer: 7 ft 7 in x 2 ft 7 in x 5 ft 6 in (2,300 mm x 800 mm x 1,680 mm)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Basic machine including belt conveyor: 27 ft 3 in x 8 ft 2 in x 9 ft 8 in (8,300 mm x 2,500 mm x 2,950 mm)
• HEIGHT ADJUSTMENT OF MACHINE - Mechanical height adjustment: 22 in (560 mm)
• FILLING CAPACITIES - Water tank (option): 290.6 gal (2 x 145.3 gal) (1.100 l (2 x 550 l)
• CONCRETE KIT FOR INSET PAVING (OPTION) - Front wall: 3 ft 3 in to 12 ft (1,000 mm to 3,650 mm)
• CONCRETE KIT FOR INSET PAVING (OPTION) - Super smoother: 6 ft 7 in to 12 ft (2,000 mm to 3,650 mm)
• FILLING CAPACITIES - Hydraulic fluid tank: 35.7 gal (135 l)
• CONCRETE FEEDING SYSTEM - Folding belt conveyor (option): Length: 19 ft 8 in (6,000 mm); belt width: 2 ft (600 mm)
• ENGINE - Rated power at 2,100 rpm: 115 kW / 154 HP / 156 PS
• TRIMMER (OPTION) - Height adjustment, hydraulic: 15.7 in (400 mm)
• TRANSPORT DIMENSIONS (L X W X H) *4 - NOTE: *4 = All specifications are minimum specifications without offset mold mounted on the paver
• CONCRETE MOLD - Max. mold width : 12 ft (3,650 mm)
• ENGINE - Sound power level in accordance with DIN EN 500-6 engine | operator’s platform: ≤ 103 dB(A) | ≥ 84 dB(A)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Basic machine excluding concrete feeding system: 20 ft x 8 ft 2 in x 9 ft 6 in (6,100 mm x 2,500 mm x 2,900 mm)
• CONCRETE MOLD - Max. mold height : 6 ft 7 in (2,000 mm)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Belt conveyor in folding design without chute: 21 ft 8 in x 3 ft 5 in x 3 ft 1 in (6,600 mm x 1,050 mm x 930 mm)
• VIBRATION - Connectors for electric vibration :
• CONCRETE FEEDING SYSTEM - Belt conveyor, long (option): Length: 19 ft 4 in (5,900 mm); belt width: 2 ft (600 mm)
• DRIVING CHARACTERISTICS - Operating speed: 0 - 49.2 ft/min (0 - 15 m/min)
• CONCRETE MOLD - Position: Left / Right
• MACHINE WEIGHTS *5 - Belt conveyor in folding design: 2,028 lbs (920 kg)
• MACHINE WEIGHTS *5 - Trimmer, working width 600 mm:
• CONCRETE KIT FOR INSET PAVING (OPTION) - Cross-spreading auger: 6 ft 7 in to 12 ft (2,000 mm to 3,650 mm)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Basic machine including belt conveyor in folding design: 23 ft 3 in x 8 ft 2 in x 9 ft 8 in (7,100 mm x 2,500 mm x 2,950 mm)
• TRIMMER (OPTION) - Lateral adjustment of trimmer: 6 ft 3 in (1,900 mm)
• CONCRETE KIT FOR INSET PAVING (OPTION) - Max. paving thickness : 15.7 in (400 mm)
• MACHINE WEIGHTS *5 - Operating weight, CE *6 : 35,494 lbs (16,100 kg)
• FILLING CAPACITIES - Hydraulic oil tank, electric vibration:
• ENGINE - Emission standards: US EPA Tier 4f
• MACHINE WEIGHTS *5 - Auger conveyor: 2,866 lbs (1,300 kg)
• FILLING CAPACITIES - AdBlue® / DEF tank : 5.3 gal (20 l)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Belt conveyor without chute: 18 ft x 3 ft 5 in x 2 ft 3 in (5,500 mm x 1,050 mm x 680 mm)
• CONCRETE MOLD - Lateral adjustment of mold: 3 ft 7 in (1,100 mm)
• CONCRETE KIT FOR INSET PAVING (OPTION) - Slab paving mold: 3 ft 3 in to 12 ft (1,000 mm to 3,650 mm)
• CONCRETE FEEDING SYSTEM - Belt conveyor: Length: 16 ft 1 in (4,900 mm); belt width: 2 ft (600 mm)
• DRIVING CHARACTERISTICS - Travel speed: 0 - 114.8 ft/min (0 - 35 m/min)
• CONCRETE MOLD - Cross-feeding auger: Length: 12 ft (3,650 mm); auger diameter:15.7 in (400 mm)
• ELECTRICAL SYSTEM - Electric vibration:
• MACHINE WEIGHTS *5 - Empty weight of basic machine including belt conveyor: 34, 172 lbs (15,500 kg)
• TRANSPORT DIMENSIONS (L X W X H) *4 - Auger conveyor without chute: 16 ft 9 in x 3 ft 9 in x 3 ft 3 in (5,100 mm x 1,150 mm x 1,000 mm)
• ENGINE - Type: TCD 4.1 L4
• MACHINE WEIGHTS *5 - Max. operating weight, full tanks, including trimmer, auger conveyor, excluding mold: 44,093 lbs (20,000 kg)
• TRIMMER (OPTION) - Height adjustment, mechanical: 14.8 in (375 mm)
• VIBRATION - Connectors for electric vibration (option): 5 or 10
• CONCRETE FEEDING SYSTEM - Auger conveyor, short (option):
• ENGINE - Engine manufacturer: Deutz
• ENGINE - Rated power:
• VIBRATION - Connectors for hydraulic vibration: 5 or 10 (option)
• TRIMMER (OPTION) - Diameter with tools: 19.7 in (500 mm)
• ENGINE - Fuel consumption, full load: 8 gal/h (30.2 l/h) | 3.6 gal/h (13.5 l/h)