Wirtgen
SP64i

WIRTGEN SP64i – INSET SLIPFORM PAVERS

Offset pavers are used to produce monolithic concrete profiles such as protective concrete walls, curb profiles, gutters or narrow paths. Thanks to numerous options, such as for concrete feeding or slipforming, offset slipform pavers are extremely versatile. Inset pavers cost-effectively produce concrete pavements, such as for motorways, arterial roads, runways or railway lines. In addition to single-layer concrete paving, bottom-layer and top-layer concrete can also be paved synchronously in two layers ‘wet on wet’.

With inset slipform pavers, the concrete is placed directly in front of the machine and distributed by a spreading auger or spreading plough. Vibrators compact the concrete homogeneously and the mold forms it in the specified width and thickness as the slipform paver advances. Integrated dowel bar and tie bar inserters position dowel bars and tie bars as specified. The finishing beam levels the area transverse to the pavement and the super smoother creates a perfect surface. When paving dual-layer concrete, the bottom-layer and top-layer concrete are processed simultaneously and paved wet-in-wet.

FULLY MODULAR INSET SLIPFORM PAVER

• The flexible 4-track slipform paver with concrete equipment specially adapted to the US market is suitable for a wide range of paving jobs with the highest quality surface evenness from 6 ft to 24 ft wide and 18 in thick (cannot be combined with all options).

• The particularly low ground pressure due to specially designed, longer crawler units simplifies operation under difficult operating conditions.

• The fully modular machine design, simple changeover and expansion, and hydraulic swing arms make the machine highly adaptable to any job site situation.

• The intelligent, electronic steering and control system ensures precise handling of the four crawler units and thus precise concrete paving.

• Precise insertion of tie bars and dowels via a self-loading dowel bar inserter (optional) makes it possible to pave concrete that requires reinforcing steel.

FEATURES

TELESCOPING MACHINE FRAME

Machine frame telescoping in longitudinal and transverse direction to allow full adjustment to site conditions.

SELF-LOADING FEATURE

Hydraulic self-loading module for dowel bar inserter, tie bar inserter and finishing equipment.

LONGITUDINAL JOINT TIE BAR INSERTER

Insertion of longitudinal joint tie bars to prevent concrete slabs from drifting apart.

OPERATOR’S PLATFORM

Ergonomically designed, walk-through operator’s platform for non-tiring, productive working.

POWER UNIT

High-powered, fuel-efficient diesel engine for concrete paving in the optimum performance and torque ranges.

CONCRETE SPREADING

Spreading plough for even distribution of the freshly delivered concrete in front of the inset paving mold.

VIBRATORS

Electrically driven vibrators for reliable concrete compaction.

INSET PAVING MOULD

Inset paving mold suitable for mounting between the track units, underneath the machine.

DOWEL BAR INSERTER

Insertion of dowel bars to maintain the surface levels of neighboring concrete slabs.

SIDE TIE BAR INSERTER

Insertion of side tie bars when paving adjacent concrete slabs.

OSCILLATING BEAM

Eccentrically driven oscillating beam for the removal of surface irregularities.

SUPER SMOOTHER

Super smoother for a perfectly smooth surface finish.

TRACK UNITS

Hydraulically driven, separately height-adjustable and steerable track units for precise driving behavior and high-precision concrete paving.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specifications

• ENGINE - Sound power level in accordance with DIN EN 500-2 engine | Operator’s platform: ≤ 102 dB(A) | ≥ 81 dB(A)
• RANGE OF APPLICATIONS - Slab paving application with central crown *1, *2: Paving width: 12 ft to 24 ft | Layer thickness: up to 18 in (450 mm)
• VIBRATORS AND CIRCUITS - Connectors for electric vibration : 18
• TANK CAPACITIES - NOTE: *3 = AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA)
• MACHINE WEIGHTS - Operating weight, CE *5 (including slab paving mold type 910 m), 12 ft : 42,000 ft (19,000 kg)
• SLAB PAVING EQUIPMENT - Slab paving mold type 910 m (including wearing pan and crown function: Modular extension up to 24 ft
• VIBRATORS AND CIRCUITS - Electically driven vibrators: Curved (D76)
• ELECTRICAL SYSTEM - Electric vibration: 110 V AC 3-/200 Hz
• SLAB PAVING EQUIPMENT - Side tie bar inserter (hydraulic):
• RANGE OF APPLICATIONS - Slab paving application *1, *2: Paving width: 6 ft 6 in to 24 ft | Layer thickness: up to 18 in (450 mm)
• RANGE OF APPLICATIONS - NOTE: *1 = Please note that not all machine configurations are available for the entire working width range. Configurations including DBI are available for working widths of up to 20 ft only; configurations including crown are available for working widths of 6 ft 6 in or larger only. *2 = Please consult factory for special paving widths, layer thicknesses, and optional equipment features
• ENGINE - Displacement: 369.5 in³ (6,057 cm³)
• DRIVING CHARACTERISTICS - Travel speed in travel gear: B0: 0 to 69 ft/min (0 to 21 m/min) | B1: 0 to 77 ft/min (0 to 23.5 m/min)
• TRANSPORT DIMENSIONS (L X W X H) - Paving width 7.50 m:
• TANK CAPACITIES - Fuel tank: 106 gal (400 l)
• SLAB PAVING EQUIPMENT - Slab paving mold type 910 m (excluding wearing pan and crown function: Modular extension up to 24 ft
• ENGINE - Type: TCD 6.1 L6
• ELECTRICAL SYSTEM - Electrical power supply: 24 V DC
• ENGINE - Engine manufacturer: Deutz
• ENGINE - Emission standards: EU Stage IV / US EPA Tier 4f
• TANK CAPACITIES - Water tank (option):
• MACHINE WEIGHTS - NOTE: *5 = Weight of machine, half weight of all operating materials, on-board tools, machine operator (165 lb (75 kg)), no optional equipment features *6 = Weights depend on the paver's range of equipment and paving width
• SLAB PAVING EQUIPMENT - Oscillating beam: Modular extension up to 20 ft
• ENGINE - Rated power:
• TANK CAPACITIES - AdBlue®/DEF tank *3: 8.5 gal (32 l)
• SLAB PAVING EQUIPMENT - Super smoother: Modular extension up to 24 ft
• CRAWLER UNITS - Type B1: Dimensions L x W x H: 6 ft 8 in x 12 in x 23 in (2,040 x 300 x 580 mm)
• TRANSPORT DIMENSIONS (L X W X H) - Paving width 4.00 m:
• TANK CAPACITIES - Hydraulic oil tank, hydraulic vibration: 106 gal (400 l)
• HEIGHT ADJUSTMENT OF MACHINE - Hydraulic height adjustment: 3 ft 7 in (1,100 mm)
• HEIGHT ADJUSTMENT OF MACHINE - Mechanical height adjustment: 17 in (420 mm)
• CRAWLER UNITS - Number: 4
• CONCRETE SPREADING - Spreading auger: Modular extension up to 24 ft
• VIBRATORS AND CIRCUITS - Connectors for hydraulic vibration: 6 (optional 12 or 18)
• CRAWLER UNITS - Type B4: Dimensions L x W x H:
• TRANSPORT DIMENSIONS (L X W X H) - Paving width 3.50 m: 29 ft 6 in x 9ft 10 in x 10 ft 2 in (9000 x 3000 x 3100 mm)
• VIBRATORS AND CIRCUITS - Hydraulically driven vibrators: Curved (D66)
• ENGINE - Rated power at 2,100 min1:
• ENGINE - Number of cylinders: 6
• RANGE OF APPLICATIONS - Slab paving application without central crown *1:
• ENGINE - Fuel consumption, full load: 12.2 gal/h (46 l/h)
• SLAB PAVING EQUIPMENT - Longitudinal joint tie bar inserter: 1
• TRANSPORT DIMENSIONS (L X W X H) - Paving width 9.50 m:
• TANK CAPACITIES - Additional water tank:
• TANK CAPACITIES - Water tank: 132.5 gal + 132.5 gal (500 l + 500 l)
• ENGINE - Rated power at 2,300 RPM: 180 kW / 241 HP / 245 PS
• CRAWLER UNITS - Type B0: Dimensions L x W x H: 4 ft 11 in x 12 in x 22 in (1,490 x 300 x 570 mm)
• TANK CAPACITIES - Hydraulic fluid tank:
• DRIVING CHARACTERISTICS - Paving speed: B0: 0 to 20 ft/min (0 to 6 m/min) | B1: 0 to 23 ft/min (0 to 7 m/min)
• MACHINE WEIGHTS - Machine weight *6: 37,500 to 99,200 lb (17,000 to 45,000 kg)
• CONCRETE SPREADING - Spreading plow: Modular extension up to 24 ft
• CENTRAL CROWN - Variable adjustment range *4: For paving widths of 2.00 to 7.50 m: max. 3%
• SLAB PAVING EQUIPMENT - Dowel bar inserter (DBI): Modular extension up to 20 ft
• CENTRAL CROWN - NOTE: *4 = Values within standard transport height; please consult factory for special dimensions.
• TANK CAPACITIES - Hydraulic oil tank, electric vibration: 53 gal (200 l)
• ENGINE - Cooling: Water
• SLAB PAVING EQUIPMENT - Side tie bar inserter: Right and/or left
• TRANSPORT DIMENSIONS (L X W X H) - Paving width 6.00 m: 37 ft 9 in x 9 ft 10 in x 10 ft 2 in (11,500 x 3000 x 3100 mm)
• ENGINE - Fuel consumption 2/3 load: 4.8 gal/h (18 l/h)