Wirtgen
SP124i

Inset Slipform PaversRoadbuildingSlipform PaversWirtgen Equipment
Find Out More
Request a Quote

WIRTGEN SP124i – INSET SLIPFORM PAVERS

Offset pavers are used to produce monolithic concrete profiles such as protective concrete walls, curb profiles, gutters or narrow paths. Thanks to numerous options, such as for concrete feeding or slipforming, offset slipform pavers are extremely versatile. Inset pavers cost-effectively produce concrete pavements, such as for motorways, arterial roads, runways or railway lines. In addition to single-layer concrete paving, bottom-layer and top-layer concrete can also be paved synchronously in two layers ‘wet on wet’.

With inset slipform pavers, the concrete is placed directly in front of the machine and distributed by a spreading auger or spreading plough. Vibrators compact the concrete homogeneously and the mold forms it in the specified width and thickness as the slipform paver advances. Integrated dowel bar and tie bar inserters position dowel bars and tie bars as specified. The finishing beam levels the area transverse to the pavement and the super smoother creates a perfect surface. When paving dual-layer concrete, the bottom-layer and top-layer concrete are processed simultaneously and paved wet-in-wet.

SLIPFORM PAVER FOR COST-EFFECTIVE, LARGE-SCALE CONCRETE PAVING

• The inset slipform paver is the perfect choice for the cost-effective paving of large concrete surfaces ranging from 16 ft to 40 ft wide and 18 in thick.

• The slipform paver can be easily adapted to any job site situation thanks to the machine frame, which can be hydraulically telescoped lengthwise and mechanically telescoped sideways.

• Standard-configuration with four track units on hydraulic arms that can be conveniently swung in for easier transportation and offer outstanding adaptability for all on-site situations.

• Precise insertion of tie bars and dowels via a self-loading dowel bar inserter (optional) makes it possible to pave concrete that requires reinforcing steel.

• The intelligent machine concept with hydraulic swing arms and worm gear steering makes it easy to transport and offers maximum flexibility in any job site situation.

FEATURES

RUGGED MACHINE DESIGN

The machine’s rugged design guarantees consistent, high-output concrete paving and precise paving results, even under difficult site conditions.

FULLY MODULAR MACHINE DESIGN

The machine’s fully modular design means its possible to flexibly modify, upgrade with new options, and adapt the machine to the specific job site situation.

SOPHISTICATED TRANSPORT CONCEPT

Compact dimensions and minimal time and effort needed to prepare the machine make loading easy and transport cost-effective. Depending on the configuration, the dowel bar inserter or oscillating beam, super smoother, and concrete spreader can remain mounted to the machine during transport.

HIGHLY FLEXIBLE CONCRETE PAVING

The standard version of the slipform paver is capable of paving perfect and precise concrete surfaces from 16 ft to 40 ft wide and up to 18 (450 mm) thick.

TRIED-AND-TESTED PAVING MOLD

Compatible with the 1300 wi series of imperial inset paving molds and comes standard-equipped with a wear sole, tamper, grout box auger, and optional crown profile.

REINFORCEMENT INSERTION BUILT INTO THE MACHINE

A self-loading dowel bar inserter with fully automated dowel magazine, a tie bar inserter, and side tie bar inserter(s) are available on request.

ALTERNATIVE COMPACTION TECHNOLOGY

Depending on site requirements, the machine can be equipped with a hydraulic or electric vibrator drive. The machines come standard with 24 hydraulic connections (optional: 30 or 36), and optional with 24 or 34 electrical connections.

COST-EFFECTIVE ENGINE MANAGEMENT

The “ECO mode” setting automatically adjusts engine power to the current performance requirements to ensure fuel-efficient diesel consumption and low noise emissions.

STATE-OF-THE-ART ENGINE TECHNOLOGY

The SP 124i features cutting-edge, high-performance engine technology (321 kW / 430 HP / 436 PS) that meets EU Stage V/US EPA Tier 4f emissions standards.

PERFECT ERGONOMICS AND HANDLING

The ergonomically designed operator’s platform, the standardized, intuitive operating concept for all SP series’ models, and exceptional visibility makes the job easier for the operator.

HIGH-PERCISION STEERING AND DRIVE SYSTEMS

Intelligent steering and control systems for extremely smooth operation – even around tight curves – make high-precision concrete paving possible.

MACHINE CONTROL SYSTEMS FEATURING ADVANCED INTELLIGENCE

WIRTGEN’s efficient WITOS FleetView telematics system supports fleet management, position and status monitoring, as well as maintenance and diagnostic processes.

FIELD-PROVEN 3D INTERFACE

The field-proven interface guarantees tested compatibility with leading suppliers’ 3D control systems.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specifications

  • ELECTRICAL SYSTEM - Electrical power supply: 24 V DC
  • ENGINE - Emission standards: EU Stage V/US EPA Tier 4f
  • VIBRATORS AND CIRCUITS - Hydraulically driven vibrators: Curved (D66)
  • ENGINE - Fuel consumption 2/3 load: 14.8 gal/h (56 l/h)
  • RANGE OF APPLICATIONS - Slab paving application without central crown *1: Paving width: 16 ft to 40 ft | Paving height: up to 18 in (450 mm)
  • TANK CAPACITIES - Hydraulic oil tank, electric vibration: 79 gal (300 l)
  • CONCRETE SPREADING - Spreading auger:
  • TANK CAPACITIES - Additional water tank:
  • CRAWLER UNITS - Number: 4
  • TANK CAPACITIES - Fuel tank: 174 gal (660 l)
  • CENTRAL CROWN - NOTE: *3 = Values within standard transport height; special dimensions on request
  • MACHINE WEIGHTS - NOTE: *4 = Weight of machine, half weight of all operating materials, on-board tools, machine operator (165 lb (75 kg)), no optional equipment features *5 = Weights depend on the actual equipment installed and paving width
  • ENGINE - Rated power at 2,300 RPM:
  • VIBRATORS AND CIRCUITS - Electrically driven vibrators: Curved (D76)
  • RANGE OF APPLICATIONS - NOTE: *1 = Special paving widths, paving heights, and options available on request
  • RANGE OF APPLICATIONS - Slab paving application *1:
  • ENGINE - Rated power at 2,100 RPM: 321 kW / 430 HP / 436 PS
  • HEIGHT ADJUSTMENT OF MACHINE - Hydraulic height adjustment: 3 ft 3 in (1,000 mm)
  • TANK CAPACITIES - Hydraulic fluid tank:
  • CENTRAL CROWN - Variable adjustment range *3: For paving widths of 16 ft to 28 ft: max. 3% | For paving widths of 28 ft to 40 ft: max. 2%
  • TANK CAPACITIES - Water tank (option):
  • TANK CAPACITIES - AdBlue®/DEF tank *2: 25 gal (95 l)
  • SLAB PAVING EQUIPMENT - Slab paving mold type 910 m (excluding wearing pan and crown function: Modular extension up to 40 ft
  • ELECTRICAL SYSTEM - Electric vibration: 110 V AC 3~/200 Hz
  • CRAWLER UNITS - Type B4: Dimensions (L x W x H): 6 ft 10 in x 17 in x 2 ft 4 in (2,090 x 430 x 712 mm)
  • DRIVING CHARACTERISTICS - Paving speed: 0 to 39 ft/min (0 to 12 m/min)
  • DRIVING CHARACTERISTICS - Travel speed in travel gear: 0 to 82 ft/min (0 to 25 m/min)
  • VIBRATORS AND CIRCUITS - Connectors for hydraulic vibration: 24 (optional 30 or 36)
  • TRANSPORT DIMENSIONS (L X W X H) - Paving width 30 ft: Including slab paving mold type, including spreading plow and super smoother: 61 ft 12 in x 11 ft 6 in x 10 ft 6 in (18,900 x 3,500 x 3,200 mm)
  • TANK CAPACITIES - Hydraulic oil tank, hydraulic vibration: 172 gal (650 l)
  • SLAB PAVING EQUIPMENT - Side tie bar inserter:
  • ENGINE - Cooling: Water
  • SLAB PAVING EQUIPMENT - Dowel bar inserter (DBI):
  • SLAB PAVING EQUIPMENT - Longitudinal joint tie bar inserter:
  • VIBRATORS AND CIRCUITS - Connectors for electric vibration : 26 (optional 34)
  • TANK CAPACITIES - Water tank: 145 gal + 145 gal + 211 gal (550 l + 550 l + 800 l)
  • RANGE OF APPLICATIONS - Slab paving application with central crown *1: Paving width: 16 ft to 40 ft | Paving height: up to 18 in (450 mm)
  • MACHINE WEIGHTS - Machine weight *5: 123,459 lbs x 224,872 lbs (56,000 - 102,000 kg)
  • ENGINE - Number of cylinders: 6
  • CRAWLER UNITS - Type B0: Dimensions (L x W x H):
  • ENGINE - Fuel consumption, full load: 20.9 gal/h (70 l/h)
  • SLAB PAVING EQUIPMENT - Slab paving mold type 910 m (including wearing pan and crown function: Modular extension up to 40 ft
  • ENGINE - Displacement: 543 in³ (8,900 cm³)
  • TANK CAPACITIES - NOTE: *2 = AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA)
  • ENGINE - Rated power:
  • ENGINE - Type: L9 C430
  • TRANSPORT DIMENSIONS (L X W X H) - Paving width 16 ft: Including slab paving mold type, including spreading plow and super smoother: 37 ft 5 in x 11 ft 6 in x 10 ft 6 in (11,400 x 3,500 x 3,200 mm)
  • SLAB PAVING EQUIPMENT - Oscillating beam: Modular extension up to 40 ft
  • HEIGHT ADJUSTMENT OF MACHINE - Mechanical height adjustment: 6 in (155 mm)
  • SLAB PAVING EQUIPMENT - Super smoother: Modular extension up to 40 ft
  • CONCRETE SPREADING - Spreading plow: Modular extension up to 40 ft
  • ENGINE - Engine manufacturer: Cummins
  • MACHINE WEIGHTS - Operating weight, CE *4 (including slab paving mold type 910 m), 16 ft: 130,073 lbs (59,000 kg)
  • SLAB PAVING EQUIPMENT - Side tie bar inserter (hydraulic):
  • CRAWLER UNITS - Type B1: Dimensions (L x W x H):