Wirtgen
SW318 MC

Binding Agent SpreadersRoadbuildingWirtgen Equipment

Find Out More

Precise and powerful binding agent spreading

STREUMASTER binding agent spreaders are suitable both for spreading large quantities of binding agents during soil stabilization and for spreading small quantities of binding agents with maximum precision during cold recycling.
There are various different types and series of binding agent spreaders. Essentially, these can be subdivided according to type into the categories truck-mounted spreaders (M – Mounted) and towed spreaders (T – Towed). In addition to the vehicle type, these types also differ in the form of their spreading units: STREUMASTER primarily offers spreaders with cellular wheel spreading units (C – Cellular wheel).
The MC series mobile binding agent spreaders are mounted on a carrier vehicle and are therefore predestined for use in difficult off-road terrain.
With a maximum spreading width of 2,360 mm the TC and MC series achieve spreading rates of up to 60 kg/m2 (at a speed of 2 km/h with a binder density of 1 kg/l).
In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent spreaders cover the complete cycle in road construction and earthworks.

Working width / Partial widths: 7 ft 9 in ( 2 ft 8 in / 2 ft 4 in / 2 ft 8 in)
Built-up empty weight : 10,141 lbs
Container capacity: 636 cu ft
Electrical system – standard: 12 V / 60 A
Required speed of the truck’s auxiliary drive for max. hydraulic power: 1,250 rpm
Required power output of the truck’s auxiliary drive: 50 kW
Required torque of auxiliary drive: 400 Nm
Size of filling connector / filling hose: 4"
Max. permissible speed of the truck’s auxiliary drive: 2,300 rpm
Minimum speed of the truck’s auxiliary drive: 500 rpm
Spread rate at 2 km/h (DN 230-10 spreading unit) : 3 - 42 kg/m²
Spread rate at 2 km/h (DN 230-20 spreading unit): 1 - 10 kg/m²
Spread rate at 2 km/h (DN 410-17 spreading unit): 5 - 60 kg/m²
Spreading quantity at 1.2 mph : 1 - 60 kg/m²